F-ONE PAPENOO CONVERTIBLE
SUP / SUP Foil / Windsurf / Windfoil / Wingsurf / Wingfoil
Waves: Small to Medium
1 board, 6 different ways to ride
Versatility and performance with no compromise
Compact shape
Stability and manoeuvrability
The PAPENOO CONVERTIBLE offers versatility and performances with no compromises!
It allows you to surf with a paddle, with or without a foil as well as windsurf or wingsurf in no time!
Adaptable to all conditions, don’t miss a session ever again.
DESCRIPTION
Its compact shape naturally provides the right balance over the foil and makes it more manoeuvrable in flight.
Its wide outline at the tail provides enough volume to be in the right position for lift off and the wide width creates plenty of stability.
The rocker is fast with a deep single concave to emphasize the speed.
The PAPENOO CONVERTIBLE comes with a twin track system on the hull as well as 2 M6 inserts.
This allows to have the foil in a forward position for SUP and Wingfoil performances. To windfoil, move the foil to the back of the tracks.
A mast track is on the deck as well as 4 footstraps inserts for windfoiling. The board can also be used as a normal windsurf board for light wind wave riding.
The deck construction has been reinforced under the feet area.
CONSTRUCTION
The BAMBOO DECK construction has been proven for many years of production and offer a weight to resistance ratio with great reliability. The deck features a layer of bamboo to provide a tough impact and crushing resistance while the many layers of reinforcement on the bottom ensures solid strength.
BAMBOO Sandwich technology
Our SUP boards benefit from the BAMBOO SANDWICH TECHNOLOGY construction. Every layer of bamboo is sandwiched between two layers of fiberglass or between a layer of carbon. This allows the sandwich technology to emphasize the characteristics of the bamboo. The final result is a light structure that is super strong and extremely reliable.
BAMBOO DECK
The top deck of the board is lined with a layer of bamboo.
BEVELED RAILS
For all surfers one of the inconveniences of a SUP is the large size of the rails, too big to dig into a turn. So, how do we make a sup with a thin rail without losing the volume of the board? The answer is the Beveled rail.
They are small flat lateral sections in V shapes, which allows us to reduce the thickness of the rail in certain sections (1). The other advantage is that they reduce the planing surface of the board (2) which therefore reduces drag. The combination of a thinner rail and slightly narrower width allows the board to get a better edge into the turns and a tighter arc.
TWIN-TRACKS
The twin track system with lateral spacing of 90mm is becoming an industry standard.
This system is compatible with all foils featuring a top plate with 4 fastening bolts. The length of the tracks enables some room to adjust the position of the foil on the board to reach everyone’s prefered balance.
SMART HANDLE
Featured on the whole F-ONE SUP hard boards range:
the innovative and multifunction handle developed by F-ONE.
The SMART HANDLE includes the following features :
1 – Decompression valve
2 – Multifunction tool compartment
3 – Recessed volume
4 – Screwdriver head
– Allen key
More comfortable with advanced ergonomics, it is completely recessed and makes it easier to carry the SUP. The new handle helps a lot to grab the boards easily when lying flat on the ground or on the water.
A groove has been added onto the thread of the valve so that you only have to unscrew by a few turns to let the air out. No need to unscrew it completely and therefore no risk to lose it.
The handle already includes the screw for the decompression valve (1).
A specific multifunction tool has been created and fits neatly into the handle (2).
The top part of the tool was designed to serve as a screwdriver to open or close the decompression valve.
To prevent from oversight and to make sure the decompression valve is always closed when the SUP is in the water, a reminder has been included: you cannot fit the tool back into its place nor can you carry the board if you haven’t closed the decompression valve. Furthermore, the tool finds itself clipped on in this position. This was made to ensure the board can be transported without losing the tool. You therefore don’t have to look for the last place where you left the tool and can be sure that anyone grabbing your board will notice that the valve is not shut.
PAPENOO CONVERTIBLE EQUIPMENT
FOOTSTRAP INSERTS
MAST TRACK
QUATTRO: 2x F-ONE PROFILER M (side) + 2x F-ONE PROFILER M (rear)
FULL PAD
GO PRO PLUG
| SIZE | DIMENSION | VOLUME | WEIGHT | DECK INSERTS | FIN BOXES | DELIVERED WITH |
| 7’11″ x 30.5″ | 242 x 77 cm | 123 L | 10.2 kg* | GoPro + F-One Handle + Leash Plug + Foot Strap inserts (x4) + Mast track | Quattro + 2x US + 2x M6 insert | Futures V2JC1 460 + QD2 400 |
*indicative value, subject to small variations due to the custom manufacturing process.
SUPDubai.ae is the leading FOne dealer based in Dubai and shipping worldwide.
Shop online for FOne SUPs, including,Race, Race Pro, Anakao and Manawa; as well as FOne paddles.
Free shipping on all fOne SUP Boards in the UAE. Free international shipping on inflatable FonefOne Stand Up Paddle Boards. Reduced shipping rates for fOne epoxy SUP boards to Qatar, Bahrain, Oman, Saudi Arabia, Kuwait, Lebanon and Egypt.
